Connection cable 5 m - replacement.Required for both the configuration and the connection of the paging system.

Central unit as base housing for a wireless base telephone system according to the DECT/GAP standard for the extension of a telephone system (PBX) with VoIP subscribers or analogue PBX subscribers: Mixed operation possible. Modular system expansion of the central unit in accordance with customer requirements with a CPU card and various plug-in cards for the management of DECT base stations and extension subscribers (a/b as well as VoIP/SIP). Use of up to 250 base stations and 500 DECT telephones. Prepared for rack mounting 482,6mm(19") or alternatively in combination with an optional wall bracket. System consisting of: - 1 central enclosure with backplane - 1 power supply unit for the supply of different slot cards - Max. Installation of 1 CPU card and 8 additional plug-in cards to control base stations and interface cards to the telecommunications system - For more than 4 base station control units a separate power supply is required. - Redundancy operation with 2nd power supply possible - Max. 8 central units networkable, for system expansion up to 250 base stations and 500 DECT terminals - system software for setting up and configuring the central unit via the system PC. Technical Data Power supply:230VAC +/-10%, 250VA Frequency range: 1880 - 1900 MHz Design Housing for rack mounting 482,6mm (19") Weight (with/without power supply): 5,34/12kg Colour: silver-grey Material (Housing) Aluminium Temperature: 0 to 40°C Rel. Humidity: max. 80% (unconditional) Current consumption: 9,48 A @ 19 V DC Connection technology: RJ45 Protection class: IP 20 Approvals: TBR6(DECT RF),TBR22(GAP) EMC ETS300329, Dimensions (WxHxD): 422X177X330 mm

CPU card for installation in the central unit 482,6mm (19"). With processor unit and serial interface as well as ETH connection. The CPU card of the central unit processes the communication between the DECT terminal devices registered in the system and the telephone system (PBX). In addition, this unit controls the voice and data signals between the individual base stations in the entire transmit/receive network. Message interface: - 1 serial interface (RS232) for - connecting the central unit to a - system PC, transmitting ASCII - text messages (SMS-paging) via a - connected PBX, - performing remote maintenance for - system analysis and service services via the system PC Networking of central units is not possible with this CPU card. Technical data: Power supply: 19 VDC (central unit) Frequency range: 1880 - 1900 MHz Design Installation in central unit Colour (front): black Material (housing) PC-ABS Temperature: 0 to 40°C Rel. Humidity: max. 80% (not conditioned) Connection technology: RJ45 and DB9 Protection class: IP 20 Approvals: TBR6(DECT RF),TBR22(GAP) EMC ETS300329, Dimensions (WxHxD): 45X140X200 mm

Compact patch panel with 12 x CAT5 sockets (RJ45 connectors) and LSA-plus connection technology. Use to connect the insert cards of the central unit 482.6mm (19") with the base stations and the telecommunications system (a/b or VoIP). Recommended for wall mounting of the 482,6mm (19") central unit. I/O: - 12 x RJ45 sockets, shielded - 12 x LSA-plus connectors Technical data: Colour: light grey RAL 7035 Material (housing): Metal Mounting: Wall mounting Temperature: 0 to 40°C Rel. Humidity: max. 80% (not conditioned) Protection class: IP 20 Properties: Cat 6 / Class E according to ISO, IEC11801 (9/2002) and EN50173 Article Patch cable (length 1m): 583486 Connection technology: RJ45

Plug-in card "Control Unit for Base Stations" to extend the central unit for the management of 8 wired base stations. A maximum expansion of up to 250 base stations (with 8 central units) can be achieved. Consists of: - 1 BS-Interface card for 1 - 8 wired base stations with LED status indicators, supply of base stations via the central unit, max. Cable length 1000m (TP CAT4, min. 0.8mm) - More than 4 control units for base stations require an additional power supply Technical data: Power supply: 19 VDC (central unit) Frequency range: 1880 - 1900 MHz Design Installation in central unit Colour (front): black Material (front): PC-ABS Temperature: 0 to 40°C Rel. Humidity: max. 80% (not conditioned) Connection technology: RJ45 Protection class: IP 20 Approvals: TBR6(DECT RF),TBR22(GAP) EMC ETS300329, Dimensions (WxHxD): 45X140X200 mm

Plug-in card "PABX-Interface" for the expansion of the central unit for the management of 16 DECT terminals. Maximum expansion of the base telephone system with 8 central units of up to 500 DECT terminals can be achieved. consisting of: - 1 PABX interface card for 16 DECT terminals for connection to the analogue a/b sockets of a PABX. Query function via "Flash" of the PABX. CLIP function with telephone number transfer. Supports different parameter adjustments for different PABX systems. - Max. Cable length 1000m (TP CAT4, min. 0.8mm) Technical data: Power supply: 19 VDC (central unit) Frequency range: 1880 - 1900 MHz Design Installation in central unit Colour (front): black Material (front): PC-ABS Temperature: 0 to 40°C Rel. Humidity: max. 80% (not conditioned) Connection technology: RJ45 Protection class: IP 20 Approvals: TBR6(DECT RF),TBR22(GAP) EMC ETS300329, Dimensions (WxHxD): 45X140X200 mm

Plug-in card "PABX-Interface" for the expansion of the central unit for the management of 8 DECT terminals. Maximum expansion of the base telephone system with 8 central units of up to 500 DECT terminals can be achieved. consisting of: - 1 PABX interface card for 8 DECT terminals for connection to the analogue a/b sockets of a PABX. Query function via "Flash" of the PABX. CLIP function with telephone number transfer. Supports different parameter adjustments for different PABX systems. - Max. Cable length 1000m (TP CAT4, min. 0.8mm) Technical data: Power supply: 19 VDC (central unit) Frequency range: 1880 - 1900 MHz Design Installation in central unit Colour (front): black Material (front): PC-ABS Temperature: 0 to 40°C Rel. Humidity: max. 80% (not conditioned) Connection technology: RJ45 Protection class: IP 20 Approvals: TBR6(DECT RF),TBR22(GAP) EMC ETS300329, Dimensions (WxHxD): 45X140X200 mm

Power supply for the central unit 482,6mm (19") (base housing) and the integrated plug-in cards (CPU card, etc.). The unit is required when more than 4 slot cards are used to manage DECT base stations in a central unit. Use of a 2nd power supply for redundancy operation. Maximum of 4 units per central unit. Info: With the central unit already 1 power supply is delivered. Technical data: Power consumption: 9,48 A 19 V DC Colour: black Material (housing) ABS Temperature: 0 to 40°C Rel. Humidity: max. 80% (not conditioned) Power supply:230VAC +/-10%, 250VA Protection class: IP 20

Optional wall bracket for aP mounting of the central unit 482.6mm (19") (base housing). The central unit is hung into the wall bracket and fixed with screws. Technical data: Colour: Silver Material (case) Metal Temperature: 0 to 40°C Rel. Humidity: max. 80% (not conditioned) protection class: IP 20

Robust DECT terminal for use in nursing and care facilities. With shockproof housing incl. a circumferential rubber seal and antimicrobial surface. Resistant to disinfectants as well as dust-proof and splash-proof (protection class IP65), optimized for a hard working day. Serves the user with high talk and standby times. Mobile device in accordance with the DECT/GAP standard for cordless telephony and, in conjunction with the call system, for transmitting the data signals of system messages (calls, alarms, technical messages, faults). Display of incoming messages on the high-quality colour display and audible message according to the predefined priority. It is also equipped with a vibrator to signal messages in any situation. Message store for up to 10 messages that can be requeried and deleted. Equipped with a 7-line illuminated colour display, numeric and function keys as well as a mounting clip and a high-quality Li-ion battery. Simple menu navigation thanks to intuitive operation in 13 different national languages via the function keys. Extensive directory with up to 200 entries (1000 phone numbers). Wireless telephony via optional headphones (with microphone) or in hands-free mode via the integrated speaker. Features: - DECT telephone incl. Battery - Body with shock protection - Headphone jack - Additional speakers - 7-line colour display - Keyboard and control buttons - Memory for 10 messages - Address book (200 entries/1000 numbers) - Call lists - 13 menu languages - Vibrator/various ring tones Technical data: Colour: light grey RAL 7035 Material (Housing): PC-ABS Screen diagonal: 4.5 cm Weight: approx. 0.14 kg (including battery) Dimensions B: 53 mm H: 152 mm T: 27 mm T: 27 mm Temperature: 5 to 40°C Temperature: 5 to 40°C Protection class: IP 65 Frequency range: 1880 - 1900 MHz MHz Approvals: TBR6(DECT RF),TBR22(GAP) EMC ETS300329

High-quality Li-ion battery as a replacement for the original battery of the DECT phone series D5. With optimised service life due to continuous temperature monitoring of the battery during the charging process. Display of the battery charging process in the display of the DECT phone. In order to achieve the maximum lifetime of the battery, the charging process must be completed completely. Start the charging process when the battery indicator is almost empty (less than 20 %). Dependence of the battery life on the charging cycles carried out (up to 500 charging cycles possible). With 2 loads per day this is approx. 12 months. If the standby time decreases, the battery must be replaced. Technical data: Battery type: Li-ion Standby time: (max.) 150 h Talk time: (max.) 16 h

Leather case with viewing window to protect against damage and dirt of the DECT phone series D5. To charge the DECT phone series D5 the device must be removed from the leather case.

Zum Laden des DECT-Telefons Serie D5, ausgestattet mit hochwertigen Lade- kontakten, um den langfristigen Einsatz zu gewährleisten. Die Ladeelektronik ist speziell für die Akkus dieser Endgeräte- Serie angepasst: kontinuierliche Temperaturüberwachung des Akkus während des Ladevorgangs, um eine optimal Akku- Lebensdauer zu ermöglichen. Anzeige des Ladevorgangs im Display des DECT-Telefons. Technische Daten: Farbe: hellgrau RAL 7035 Material (Gehäuse): PC-ABS Gewicht: ca. 0,2kg Abmessungen B: 70 mm H: 50 mm T: 50 mm Temperatur: 5 bis 40°C Schutzklasse: IP 20

Robust DECT terminal with an alarm button for use in care and support facilities. Automatic selection when pressing the alarm button of a pre-programmed phone number. With shockproof housing incl. a circumferential rubber seal and antimicrobial surface. Resistant to disinfectants as well as dustproof and splash-proof (protection class IP65), optimized for a hard working day. Serves the user with high talk and standby times. Mobile device according to the DECT/GAP standard for cordless telephony and in conjunction with the PBX to transmit the data signals of system messages (calls, alarms, technical messages, faults). Display of incoming messages on the high-quality colour display and audible message according to the predefined priority. Prepared for displaying messages in different colours as well as with special symbols (planning in future firmware of the central unit, functional support of the call system necessary). Also equipped with a vibrator to signal messages in any situation. Message store for up to 20 messages that can be retrieved and deleted again. Equipped with a 7-line illuminated colour display, numeric and function keys as well as a mounting clip and a high-quality Li-ion battery. Simple menu navigation thanks to intuitive operation in 13 different national languages via the function keys. Extensive directory with up to 200 entries (1000 phone numbers). Cordless telephony via an optional headphone (with microphone) or in hands-free mode via the integrated speaker. Features: - DECT telephone incl. Battery - Shockproof housing - Headphone connection - Additional speakers - 7-line colour display - Keyboard and control buttons - Memory for 20 messages (> 150 Zchn) - Address book (200 entries/1000 numbers) - Call lists - 13 menu languages - Vibrator/various ring tones Technical data: Colour: light grey RAL 7035 Material (Housing): PC-ABS Screen diagonal: 4.5 cm Weight: approx. Dimensions B: 53 mm H: 152 mm T: 27 mm Temperature: 5 to 40°C Protection class: IP 64 Frequency range: 1880 - 1900 MHz Approvals: TBR6(DECT RF),TBR22(GAP) EMC ETS300329