Systevo central unit in aP-/rack version as central unit for an organizational unit such as station or living area.Use of System Release V12 to comply with VDE 0834-1: 2016-06 in conjunction with parent system license.Also required to activate the system functions (e.g. mobile call query, system size, etc.).Central unit with fieldbus interface for the management of max. 127 active system components on the room bus such as room terminals, room electronics modules, information displays and other units. The room bus can be segmented into up to six subgroups.Management of max. 40 IP subscribers via ETH-LAN as IP touch terminals for extended service features.Bus termination option for room bus termination (data/audio).Additional repeaters (data/audio) required after 64 active system components. Possibility of firmware update of active system components (if supported by the units).Monitoring and synchronisation of all data traffic as well as audio connections (calls, announcements) within the organisational unit and coordination of communication to other control centres via IP interface (ETH-LAN / station bus).In addition, control of display displays and audible call notifications, according to defined priorities/services (interconnections) within a system installation. Flexible configuration options via the operating computer (PC) with convenient Windows GUI for call types, groups, services, group announcements, display texts, device parameters, system language, etc. depending on customer needs.Use of a maximum of 64 control panels with up to 250 logical groups (subgroups). Networking takes place via the ETH-LAN IP interface (data/audio) or existing installations via the station bus (data/audio).The wiring via ETH-LAN and / or fiber optic LAN takes place according to the specifications of the classic network design.Networking is done via suitable switches / routers (ETH-LAN: IEEE802.3), which automatically detect the necessary transmission rates (10, 100, 1000MBit).Port-based VLAN network components with QoS / ToS enable the prioritization of the light call data services over the voice services.For security reasons (VDE 0834-1), all IP components (control panels, operating computers) work in a uniform IP address space (10.1.x.y), which is not used by other trades (e.g. GLT, medical equipment, etc.). To use a different IP address space (192.168.x.y), the configuration is done via an optional DHCP server.Communication is based on TCP/IP via defined optical call protocols. Utilities such as Telnet, FTP are used for remote access and data transfer. Additional network applications (syslog, firewall, etc.) serve the system security and the possible analysis of stored log data.With integrated gateway function for forwarding data/audio signals from the superior bus interface (ETH-LAN, station bus) to the room bus.Setting up of a master control panel (with ETH-LAN: without room bus) for communication to the superior control computer via ETH-LAN and for controlling the escalation of all system messages within the entire system. Prepared for future license-dependent firmware updates to take advantage of additional service features. Central or decentralized installation (aP/rack version) in environment class I.Project-specific planning of central equipment from 500 rooms.Operation as master / slave control panel (depending on addressing / config.)Communication via ETH-LAN (up to 64)Terminal blocks room bus (data/audio)Connecting terminals Energy supplyCommunication interface to the active system componentsConnection terminals Disturbance detector relaysUSB-C connectorService functions:Software Download for Systemkomp., remote maintenance / SNMP-Fkt (with PC), basic commissioningSecurity features:Data retention in case of network failure acc. DIN VDE 0834 (USV required)Local emergency operationSequential monitoring of the connected active components, further control panels in the system network / PC communication acc. VDE 0834-1 x Relay contact for reporting faults within the group (AS/RS)galvanic isolation to other control panels by ETH-LAN connectionStatus display via LEDsFlash for data storage of the system
System rack for mounting a maximum of 3 Systevo Control IP+ in a 19-inch distribution cabinet. Integrated DIN rail and cable ducts. Supplied as a kit.Material: Steel (PVC pipes)Assembly: 19 inch distribution cabinetColour: blackWeight: approx. 3150 gDimensions: W: 480 mm H: 222 mm D: 250 mm (5 HU)
System-Workstation Mini mit Betriebssystem Windows 10 IoT zur Einrichtung und Konfiguration sowie Protokollierung für eine Systevo Call Ackermann Rufanlage mit max. 200 Zimmern, mit System-Release V12. Zusätzliche System-Lizenz in Abhängigkeit der Systemfunktionen für maximal 200 Zimmer erforderlich.
Bestehend aus einem hochwertigen Mini-System-PC (24/7 Betrieb) für Wandmontage mit Schnittstellen (RS232, LAN), SSD, RAM. Optional als Schnittstelle zu einer DECT-Anlage.
Austattung der Anwendersoftware:
Konfigurationstool Systevo Call für max. 200 Zimmer (IP Geräte werden nicht unterstützt)
Zuweisung der Zimmerkonfiguration:
Elektronikmodule, Zimmerterminals, Systevo Touch IP im Datenbus Modus-Definition von Funktionen/Parametern der Rufanlage gemäß VDE 0834: 2016-06
Einrichtung der Rufarten, Rufartgruppen, Rufart-Aufwertungen
Einrichtung der VoIP/SIP-Channel zur mobilen Rufabfrage via DECT/WIFI (sep. Lizenz/SIP-Lizenz erforderlich)
Konfiguration Ein-/Ausgangsevents zur Steuerung ext. Systeme: Licht/Jal.
System-Mgmt Tools, Datenbank-Mgmt-Sys.
Netzwerkfunktionen für Systemzugriffe
Frei konfigurierbare Dienste (Zusa)
Zuordnung von zeitlichen Diensten
Auswahl von Rufartgruppen f. Dienste
Konfiguration des Levels der akustischen Rufnachsendung (Tag-/Nacht)
Definition zielorientierter Weiterleitung zwischen Stationen (Rufarten)
Frei konf. Durchsagefunktionen
Auswahl von Zielen bei Durchsagen
Störungsüberwachung und Meldung (gemäß DIN VDE 0834: 2016-06)
Optionale Software (Lizenz notwendig):
Nachrichtenübertragung an ein drahtloses Meldungssystem (z.B. WIFI-/DECT-System oder -PSA-)
Frei konfigurierbare Empfängeradressen für Meldungen aus Gruppen der Rufanlage
Definition des Anzeigeformates der zu übertragenden Nachrichten
Einrichtung von unterschiedlichen Diensten (z.B. Tag-, Nachtdienst)
Zuordnung von Wiederholzeiten, akustischen Ruftönen, etc.
Mindestausstattung:
Wandgehäuse mit Montagehalter
Mainboard: Quad-Core Celeron µP J4105 2.5 GHz oder gleichwertig
min. 8 GB RAM
1* Solid-State HDD (SSD) min. 240GB
Display-Port-Grafikkarte
2* RS232, USB
2* LAN Ethernet (min 10/100 MBit)
24V DC Stromversorgung
Windows 10IoT Basic
Dauerbetrieb: 24/7
System-Workstation zur Konfiguration, Anzeige, Bedienung und Protokollierung für Systevo Call Ackermann, ausgestattet mit System-Release V12.
System-Lizenz in Abhängigkeit der Systemfunktionen/-größe erforderlich.Optional als Schnittstelle zu Fremdsystemen wie DECT-Anlage, BMA-System.
Bestehend aus einem hochwertigen Systemrechner mit Maus, SSD, Schnittstellen (RS232, LAN).
Ausstattung der Anwendersoftware mit System-Release V12:
Konfigurationstool Systevo Call Ackermann
Zuweisung der Zimmerkonfiguration
Definition von Funktionen/Parametern der Rufanlage gemäß DIN VDE 0834-1: 2016-06
Einrichtung der Rufarten, Rufartgruppen, Rufart-Aufwertungen
Einrichtung der VoIP/SIP-Channel zur mobilen Rufabfrage via DECT/WIFI (separate Lizenz/SIP-Lizenz erforderlich)
Konfiguration Ein-/Ausgangsevents zur Steuerung externer Systeme: Licht/Jal./TV
Einstellung von Radio- und TV-Programm
System-Management Tools, Datenbank- Management -System
Netzwerkfunktionen für Systemzugriffe
Frei konfigurierbare Dienste (Zusammenschaltung)
Zuordnung von zeitlichen Diensten
Auswahl von Rufartgruppen für Dienste
Konfiguration der Lautstärke der akustischen Rufnachsendung (Tag-/Nacht)
Definition zielorientierter Weiterleitung zwischen Stationen (Rufarten)
Frei konfigurierbare Durchsagefunktionen
Auswahl von Zielen bei Durchsagen
Störungsüberwachung und Meldung (gemäß DIN VDE 0834-1: 2016-06)
Grafische / tabellarische Anzeige von Meldungen nach Priorität/Rufart/Zeit
Anwesenheits-/Rufmeldungen
Zugriffskontrolle über Benutzerkennung (wenn erforderlich)
Hyper-V Datenbanksystem
Optional:
Nachrichtenübertragung an ein drahtloses Meldungssystem (z.B. WIFI-/DECT-System oder -PSA)
Frei konfigurierbare Empfängeradressen für Meldungen aus Gruppen der Rufanlage
Definition des Anzeigeformates der zu übertragenden Nachrichten
Einrichtung von unterschiedlichen Diensten (z.B. Tag-, Nachtdienst)
Zuordnung von Wiederholzeiten, akustischen Ruftönen, etc.
Tastatur für System-Workstation/Server mit USB-Anschluss.
Ausführung im modernen, flachen Design mit sanften, leisen und dauerhaft abriebfesten Tasten. Universell und zuverlässig sowie optimiert für professionellen Einsatz.
Mindestausstattung:
Kabelgebundene Tastatur
Plug&Play über USB-Anschluss
3 Status-LEDs
System server for configuration, display, operation and logging for Systevo Call Ackermann, equipped with System Release V12, especially for larger system installations/IP systems.System license required depending on system functions/size. Optional as an interface to external systems such as DECT system, BMA system.Consists of a high-quality system computer with mouse, SSD, interfaces (RS232, LAN).Equipping the user software with System Release V12.Configuration tool Systevo Call AckermannAssignment of room configurationDefinition of functions/parameters of the paging system according to DIN VDE 0834-1: 2016-06Setup of call types, call type groups, call type upgrades
Setting up the VoIP/SIP channel for mobile call querying via DECT/WIFI (separate license/SIP license required)Configuration of input/output events to control external systems: Light/Jal./TVSetting up radio and TV programmesSystem Management Tools, Database Management SystemNetwork functions for system accessFreely configurable services (interconnection)Assignment of temporary servicesSelection of call groups for servicesConfiguration of the volume of the acoustic call forwarding (day/night)Definition of target-oriented forwarding between stations (call types)Freely configurable announcement functionsSelection of targets for announcementsFault monitoring and reporting (according to DIN VDE 0834-1: 2016-06)Graphical / tabular display of messages by priority/call type/timeAttendance/call notificationsAccess control via user ID (if required)Hyper-V database systemOptional:Message transmission to a wireless messaging system (e.g. WIFI/DECT system or PSA)Freely configurable recipient addresses for messages from groups of the PBXDefinition of the display format of the messages to be transmittedSetting up different services (e.g. day, night)Assignment of repetition times, acoustic ringtones, etc.
Software module as basic software for connecting an external communication system (e.g. alarm-server for WIFI/DECT system) to the Systevo Workstation via ESPA-X (XML data set). Ability to adapt the settings to the project-specific requirements of the care facility. Call and stop messages from the PBX are transmitted to the connected system according to the configuration and displayed by the configured terminal devices (e.g. WIFI/DECT telephones).Administrator access rights required, e.g. to adapt the IP interface to the system environment of the PBX.User software for the following functions:Configuration tool with database management system for data storageSetting the IP interface (TCP/IP)Interface to the overall system software of the PBX (IPC)Freely configurable recipient addresses per light call group and call type groupsAssignment of call types to higher-level call type groupsSetting up different services (e.g. day, night)Assignment of repetition timesAdjustment of the acoustic ringtonesFiltering options for recipient addressesConfiguration of different escalations per call type groupDefinition of the display format of the messages to be transmittedTextual message transmission of system messages to the external system (incl. call cancellation)Service functionsSimple system management tools for system analysis (Sys-Log etc.)Creation of a recipient list (file)Password Protector AccessPrerequisite:Operating computer with free ETH-LAN interface
Modern, flexible, efficient and microprocessor-controlled online 230VAC UPS converter for constant uninterrupted power supply of critical consumers such as workstation or PBX server.Sturdy and compact 19 inch housing with 3 IEC C13 sockets for connection of external devices, can be used as a desktop device. Monitoring of electronics and batteries as well as intelligent battery management incl. status indicators for battery charging status / load indicator,
Battery voltage / capacity as well as temperature and system messages (among others). Replacement of batteries in hot-swap possible.Equipped with serial interface for connection to a PC as well as management software for current Windows operating systems included in the scope of delivery. Relay card for status reporting to external trades.Use of dual-converter technology to deliver 100% pure sine wave power at all times, independent of input voltage and frequency, to ensure the proper operation of the connected components.Number of batteries: 3x7 AhRecommended circuit breaker: 16 A (B,C) (character.)Connection input: IEC C14Max. Output current (per phase): 3.9AOutput power: 0.9KWPower dissipation at 100% load: 90 W (230 VAC)Efficiency: typically 90 %Autonomy time at 75% load: 8 min.Battery replacement Hot-Swap: YesRequired cooling air volume: 50m³
€2,115.63*
€2,644.54*(20% saved)
This website uses cookies to ensure the best experience possible. More information...