Touch terminal IP, with 7" display and capacitive user interface to support daily care procedures in nursing homes. User-compliant display / design of runtime-critical and relevant data and process sequences for user groups such as nurses, medical services and support personnel (e.g. IT department, technical service), to reduce travel times, optimize productivity and efficient information flow of nursing tasks. Use of RFID technology/PIN code for audit-proof authentication/timely registration of processes and for access control in accordance with GDPR requirements, depending on the requirement in care facilities.Design as IP communication unit for full-duplex operation, in high-quality aP housing for resident/patient/service rooms, as well as as a control unit for additional functions in the respective room and as a gateway to mobile devices. Intuitive operation via the backlit touch display with high colour brilliance and good readability in different environmental parameters (brightness, distance). Call communication in free intercom (full-duplex) and announcement function (send/receive) via IP communication or bus technology as well as connection with VoIP/SIP interface (ETH, WIFI), for communication via the telecommunications system. Optional extension with telephony client (SIP) for office rooms and function rooms.Display of system messages for preset presence (alarms, calls and presences etc.) with the highest priority in color, prioritized order and time / date. Acoustic call forwarding in case of preset presence as well as possibility to trigger further calls. Option to configure the post-mode to turn off the display to fulfill the night sleep for residents/patients. Support of workflow-relevant processes by displaying and selecting/deselecting services (interconnections), for extended call forwarding to further stations. Use of RFID technology for authentication at the touch terminal for access to patient data directly in the patient room as well as documentation of care procedures. With this efficient design of nursing tasks / activities as well as documentation for the respective patient in order to relieve the burden of routine work and support the daily care processes in a suitable way. Care services are documented immediately after provision: collection of vital data, nursing activities, medication and other documentation-required information, to reduce erroneous records. Energy saving and optimized domotic control functions are provided by a local user interface.Security: Monitoring/synchronization of all data traffic as well as audio connections (calls, announcements) to other rooms within the organizational unit, coordination of communication with the central units and other IP users via IP interface (ETH-LAN, WIFI). The configuration data of a room is managed via the management server, provided through the use of standardized web services, and stored locally. Supporting the cyber security requirements of modern IT infrastructures. Upgradeable to future system firmware thanks to pioneering flash and memory technologies to ensure an automated software update during operation. Multi-level security concept enables local call signaling in the event of a lack of communication with the central unit of the system.Activation of licensed system functions by means of separate software licenses required:RFID Fkt., IP-Fkt. (ETH-LAN/WIFI/BT) Service room Fkt. (interconnections, announcements, room/bed prioritization), telephony (SIP client), maintenance docu (KIS interface required).High quality tempered mineral glass with a surface integrated into the aP plastic housing for easy cleaning / disinfection of the device.Plastic compound with antimicrobial surface to reduce microorganisms and inhibit the growth of germs.Good mechanical properties with high resistance for daily use (operating, cleaning, disinfection, shock, etc.).Suitable for use in nursing facilities with high demands on hygiene, stability, durability and durability (continuous operation).Temporary shutdown of the touch display for cleaning mode to disinfect the surface / housing.UV-resistant, impact resistanceHeat resistance, strengthDurability, halogen-freeFlame protection (fire protection class V0)System architecture:Processor: Cortex A64 quad-core, 1.2GHzMemory: 1GB DDR3, 8GB FlashOperating system: Linux Cyber Security: Firewall, VNC (SSH), Secure Boot Loader Function VoIP/SIP: Digital, Codec G.711, P2PConfiguration: via web service LAN: RJ45, 10/100Base-TX/IEEE 802.3TH for Digital Data/Audio (WIFI opt.Control element (touch display):Panel size: 17cm, 16:9Technology: TFT LCD, LED illuminationResolution: 1024x600, 16.7M colorsTouch technology: capacitive, multitouchGlass: tempered mineral glass/hardness 7HPermissible disinfectants:Ethanol, ammonium chloride, aldehydeCleaning mode can be activated for 10sLoudspeakers/acoustics:Power: 2W (normal), 2.5W (max.)Frequency range: 380Hz-20kHz

Systevo connection unit for IP touch terminal, for providing the required call system and control functions in occupant/patient/service rooms according to DIN VDE 0834. Serves as a control unit for additional functions in the respective room and as a gateway to the higher central unit (data bus). Monitoring/synchronization of all data traffic as well as audio connections (calls, announcements) to other rooms within the organizational unit, coordination of communication with the central units and other participants via data bus. Management of configuration data via management server, redundant local flash storage and use of profiles (functions, I/O, device services).Connection of the multifunctional room units and the signal light via the data bus (DBUS) as well as use of call inputs (I/O) for connection to the room controller and integration into the data bus, ZBUS. Connection of the bed bus (BBUS) in compatibility mode (for bed module). Use of user-friendly installation technology with colour-coded terminal blocks for the individual device and control functions, for efficient cabling and optimization of the commissioning process. Support bed-by-bed speaking in conjunction with a bed/intercom unit and handheld device at the bed.Upgradable to future system firmware thanks to pioneering flash and memory technologies: Possibility of automated software update during operation. Multi-level security concept enables local call signaling in the event of a lack of communication with the central unit of the system. Meeting the cyber security requirements of modern data bus infrastructures. Licensed system functions are provided by appropriate software licenses. Mechanical lock function to secure the IP-Touch terminal.High quality plastic compound with antimicrobial surface to reduce microorganisms and inhibit the growth of germs.Good mechanical properties with high resistance for daily use (operating, cleaning, disinfection, shock, etc.)Suitable for use in nursing facilities with high demands on hygiene, stability, durability and durability.Temporary shutdown of the touch display for cleaning mode to disinfect the surface, housing.Plastic (PC+ABS-FR), mattUV-resistant, impact resistanceHeat resistance, strengthDurability, halogen-free Flame protection (fire protection class V0)System infrastructure:Processor/OS: Embedded μC System CyberSecurity: Firewall, Secured Boot Loader FunctionConfiguration: via data serviceInputs/outputs:LAN: Ethernet Cat 5F/UTP, 802.3afPower supply 24V DCDBUS: 2x RS487 (each 200m) for 4 users eachABUS/ZBUS: 1x RS487 each (500m)BBUS: 1xRS485 (200m)Call input/output: 4x I/OTerminal blocks: color coded for up to 2x 0.8mm (3x 0.6mm) rigid Galvanic isolation of control functions according to EN 60601.1.1 by external protection measures

Systevo connection unit for IP touch terminal, for providing the required call system and control functions in occupant/patient/service rooms according to DIN VDE 0834. Serves as a control unit for additional functions in the respective room and as a gateway to the higher central unit (data bus). Monitoring/synchronization of all data traffic as well as audio connections (calls, announcements) to other rooms within the organizational unit, coordination of communication with the central units and other participants via data bus. Management of configuration data via management server, redundant local flash storage and use of profiles (functions, I/O, device services).Connection of the multifunctional room units and the signal light via the data bus (DBUS) as well as use of call inputs (I/O) for connection to the room controller and integration into the data bus, ZBUS. Connection of the bed bus (BBUS) in compatibility mode (for bed module). Use of user-friendly installation technology with colour-coded terminal blocks for the individual device and control functions, for efficient cabling and optimization of the commissioning process. Support bed-by-bed speaking in conjunction with a bed/intercom unit and handheld device at the bed.Upgradable to future system firmware thanks to pioneering flash and memory technologies: Possibility of automated software update during operation. Multi-level security concept enables local call signaling in the event of a lack of communication with the central unit of the system. Meeting the cyber security requirements of modern data bus infrastructures. Licensed system functions are provided by appropriate software licenses. Mechanical lock function to secure the IP-Touch terminal.High quality plastic compound with antimicrobial surface to reduce microorganisms and inhibit the growth of germs.Good mechanical properties with high resistance for daily use (operating, cleaning, disinfection, shock, etc.)Suitable for use in nursing facilities with high demands on hygiene, stability, durability and durability. Temporary shutdown of the touch display for cleaning mode to disinfect the surface, housing.Plastic (PC+ABS-FR), mattUV-resistant, impact resistanceHeat resistance, strengthDurability, halogen-freeFlame protection (fire protection class V0)System infrastructure:Processor/OS: Embedded μC System CyberSecurity: Firewall, Secured Boot Loader FunctionConfiguration: via data serviceInputs/outputs:LAN: Ethernet Cat 5F/UTP, 802.3afPower supply 24V DC DBUS: 2x RS487 (each 200m) for 4 users eachABUS/ZBUS: 1x RS487 each (500m)BBUS: 1xRS485 (200m)Call input/output: 4x I/OTerminal blocks: color coded for up to 2x 0.8mm (3x 0.6mm) rigid Galvanic isolation of control functions according to EN 60601.1.1 by external protection measures

Systevo connection unit for IP touch terminal, for providing the required call system and control functions in occupant/patient/service rooms according to DIN VDE 0834. Serves in full IP mode as a control unit for additional functions in the respective room and as a gateway to the higher-level central unit (via Ethernet LAN). All services are routed to the touch terminal via the ETH-LAN interface (license required if applicable). Monitoring/synchronization of all data traffic as well as audio connections (calls, announcements) to other rooms within the organizational unit, coordination of communication with the central units and other participants via data bus. Management of configuration data via management server, redundant local flash storage and use of profiles (functions, I/O, device services).Connection of the multifunctional room units and the signal light via the data bus (DBUS) and use of call inputs (I/O) for connection to the room controller. Use of user-friendly installation technology with colour-coded terminal blocks for the individual device and control functions, for efficient cabling and optimization of the commissioning process. Support bed-by-bed speaking in conjunction with a bed/intercom unit and handheld device at the bed.Upgradable to future system firmware thanks to pioneering flash and memory technologies: Possibility of automated software update during operation. Multi-level security concept enables local call signaling in the event of a lack of communication with the central unit of the system. Meeting the cyber security requirements of modern data bus infrastructures. Licensed system functions are provided by appropriate software licenses. Mechanical lock function to secure the IP-Touch terminal.High quality plastic compound with antimicrobial surface to reduce microorganisms and inhibit the growth of germs.Good mechanical properties with high resistance for daily use (operating, cleaning, disinfection, shock, etc.).Suitable for use in nursing facilities with high demands on hygiene, stability, durability and durability.Temporary shutdown of the touch display for cleaning mode to disinfect the surface, housing.Plastic (PC+ABS-FR), mattUV-resistant, impact resistanceHeat resistance, strengthDurability, halogen-freeFlame protection (fire protection class V0)System infrastructure:Processor/OS: Embedded μC SystemCyber Security: Firewall, Secured Boot Loader FunctionConfiguration: via data serviceInputs/outputs:LAN: Ethernet Cat 5F/UTP, 802.3afPower supply 24V DCDBUS: 2x RS487 (each 200m) for 4 users eachABUS/ZBUS: 1x RS487 each (500m)BBUS: 1xRS485 (200m)Call input/output: 4x I/OTerminal blocks: color coded for up to 2x 0.8mm (3x 0.6mm) rigid Galvanic isolation of control functions according to EN 60601.1.1 by external protection measures

Systevo connection unit for IP touch terminal, for providing the required call system and control functions in occupant/patient/service rooms according to DIN VDE 0834. Serves as a control unit for additional functions in the respective room and as a gateway to the superior central unit (Ethernet LAN and / or data bus). Value-added services are routed to the touch terminal via the ETH-LAN interface (license required). Monitoring/synchronization of all data traffic as well as audio connections (calls, announcements) to other rooms within the organizational unit, coordination of communication with the central units and other participants via data bus. Management of configuration data via management server, redundant local flash storage and use of profiles (functions, I/O, device services).Connection of the multifunctional room units and the signal light via the data bus (DBUS) as well as use of call inputs (I/O) for connection to the room controller and integration into the data bus, ZBUS. Connection of the bed bus (BBUS) in compatibility mode, not usable in full IP mode. Use of user-friendly installation technology with colour-coded terminal blocks for the individual device and control functions, for efficient cabling and optimization of the commissioning process. Support bed-by-bed speaking in conjunction with a bed/intercom unit and handheld device at the bed.Upgradable to future system firmware thanks to pioneering flash and memory technologies: Possibility of automated software update during operation. Multi-level security concept enables local call signaling in the event of a lack of communication with the central unit of the system. Meeting the cyber security requirements of modern data bus infrastructures. Licensed system functions are provided by appropriate software licenses. Mechanical lock function to secure the IP-Touch terminal.High quality plastic compound with antimicrobial surface to reduce microorganisms and inhibit the growth of germs.Good mechanical properties with high resistance for daily use (operating, cleaning, disinfection, shock, etc.).Suitable for use in nursing facilities with high demands on hygiene, stability, durability and durability.Temporary shutdown of the touch display for cleaning mode to disinfect the surface, housing.Plastic (PC+ABS-FR), mattUV-resistant, impact resistanceHeat resistance, strengthDurability, halogen-freeFlame protection (fire protection class V0)System infrastructure:Processor/OS: Embedded μC SystemCyber Security: Firewall, Secured Boot Loader FunctionConfiguration: via data serviceInputs/outputs:LAN: Ethernet Cat 5F/UTP, 802.3afPower supply 24V DCDBUS: 2x RS487 (each 200m) for 4 users eachABUS/ZBUS: 1x RS487 each (500m)BBUS: 1xRS485 (200m)Call input/output: 4x I/OTerminal blocks: color coded for up to 2x 0.8mm (3x 0.6mm) rigidGalvanic isolation of control functions according to EN 60601.1.1 by external protection measures